The door can be used in industrial atmospheres, in areas with temperate and cold climates, in closed heated and ventilated rooms at ambient temperatures from -25 to +40 °C with relative humidity up to 80 %.
If the door is operated from the street side, installation should be done in a cold vestibule to prevent possible condensation on the surface and, as a result, deformation of finishing materials.
To avoid fading of the door block coating, installation should be carried out using a protective visor to prevent sunlight and precipitation from reaching the surface of the door block.
It is not allowed to close the door leaf with the locks or bolts extended. This can lead to failure of the lock mechanisms and deformation of the bolts.
Foreign objects are not allowed to get into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during repair and construction work.
It is prohibited to install additional equipment or accessories, or to replace or adjust individual parts yourself without consulting the manufacturer.
Care for decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.
If door systems are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.
It is recommended to lubricate the hinge assembly with a thin layer of lubricant every 6 months.
