High-speed rolling gates of the SPEEDROLL SDA series are designed to isolate and preserve the microclimate of premises in industrial, warehouse, commercial and other facilities.
Application:
- Interior premises with strict requirements for controlled temperature preservation
Design
Surface type
Doors frame/curtain colour
ASIS 304 stainless steel door frame
RAL 5002 Ultramarine blue
Equipment
Tracks and track covers made of AISI304 stainless steel
Zinc-caoated shaft, diameter 130 mm
Guide rails — extruded polyethylene
Door curtain — nontransparent reinforced PVC with density of 900–1,200 g/sqm
Control unit — with frequency converter; integrated into the vertical track
Photocells are installed at 500 mm above the floor level and at the top of side tracks to detect incorrect unwinding of the opening curtain. If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automatically with a counterweights to a height of about 2,000 mm
Technical description
Size Table
Construction
Standard Construction
Specifications
Operating Conditions
Packaging
Opening width, mm
from 2,000 to 4,000
Opening height, mm
from 1,800 to 4,000
Sideroom clearance, mm
330
- Electric drive (positioned inside the vertical track)
- Shaft (positioned inside the shaft box)
- Shaft box
- Door curtain
- Guides
- Vertical track
- Curtain bottom edge
- Photoelectric cell
- Control unit
General view of the doors with side drive (drive on the left/drive on the right)
| Symbol, parameter name |
Calculation formula |
| H, mm Opening height |
from 1,800 to 4,000 |
| B, mm Opening width |
from 2,000 to 4,000 |
| Parameter |
Value |
Notes |
|
Wind load, Pa |
CLASS1 |
for doors up to 4,000 mm wide |
|
Opening speed, m/s |
2.0 |
|
|
Closing speed, m/s |
0.8 |
|
|
Operating temperature range, °С |
from -15 to +70 |
if the drive is installed inside the premise |
|
Operating temperature range, °С |
from -5 to +70 |
if the drive is installed outside the premise |
|
Operating temperature range, °С |
from -35 to +70 |
with the heating system for tracks and drive |
|
Power, W |
1,500 |
|
|
IP protection class |
IP54 |
end positions are monitored by the encoder |
|
Supply voltage, V |
220 V / 50 Hz |
single-phase |
|
Supply voltage, V |
380 V / 50 Hz |
triphase |
|
Number of cycles |
1,500,000 |
depends on operating conditions |
1. Carry out regular maintenance of high-speed doors to provide their smooth and safe operation.
2. Manual closing and opening of the doors is carried out with a hand crank.
3. Don’t strike the door curtain or obstruct its movement.
4. Keep the rails clean.
5. Never stay or cross an opening under a moving door curtain as it may cause serious injury.
6. Keep the door opening clear of any objects during door closing or opening.
| Packing in wood |
Packaging features |
| Contents |
wooden crate, door parts are protected with cardboard and fixed with clamps |
| Length, mm |
depends on door parts length |
| Height, mm |
700 |
| Width, mm |
665 |
Additional Information print
All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.
Installation
Mounting Options
Checking Dimensional Details
- All the necessary measurements are taken inside the premises. Every dimension should be taken at least in three points:
- H — opening height (distance from floor to opening top);
- W – opening width (distance between left and right side of the opening).
- When measuring Н and W the largest figure is taken for final dimension.
Warranty print
DoorHan s.r.o. warrants the high-speed doors to operate properly for a period of 1 year from purchase date for retail orders, and for a period of 2 years from purchase date for dealer orders.
New Products
DoorHan drive (220/380 V)
Design
Surface type
ASIS 304 stainless steel door frame
Doors frame/curtain colour
RAL 5002 Ultramarine blue
Equipment
Standard
Tracks and track covers made of AISI304 stainless steel
Zinc-caoated shaft, diameter 130 mm
Guide rails — extruded polyethylene
Door curtain — nontransparent reinforced PVC with density of 900–1,200 g/sqm
Control unit — with frequency converter; integrated into the vertical track
Photocells are installed at 500 mm above the floor level and at the top of side tracks to detect incorrect unwinding of the opening curtain. If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automatically with a counterweights to a height of about 2,000 mm
Technical description
Size Table
Opening width, mm
from 2,000 to 4,000
Opening height, mm
from 1,800 to 4,000
Sideroom clearance, mm
330
Construction
- Electric drive (positioned inside the vertical track)
- Shaft (positioned inside the shaft box)
- Shaft box
- Door curtain
- Guides
- Vertical track
- Curtain bottom edge
- Photoelectric cell
- Control unit
Standard Construction
General view of the doors with side drive (drive on the left/drive on the right)
| Symbol, parameter name |
Calculation formula |
| H, mm Opening height |
from 1,800 to 4,000 |
| B, mm Opening width |
from 2,000 to 4,000 |
Specifications
| Parameter |
Value |
Notes |
|
Wind load, Pa |
CLASS1 |
for doors up to 4,000 mm wide |
|
Opening speed, m/s |
2.0 |
|
|
Closing speed, m/s |
0.8 |
|
|
Operating temperature range, °С |
from -15 to +70 |
if the drive is installed inside the premise |
|
Operating temperature range, °С |
from -5 to +70 |
if the drive is installed outside the premise |
|
Operating temperature range, °С |
from -35 to +70 |
with the heating system for tracks and drive |
|
Power, W |
1,500 |
|
|
IP protection class |
IP54 |
end positions are monitored by the encoder |
|
Supply voltage, V |
220 V / 50 Hz |
single-phase |
|
Supply voltage, V |
380 V / 50 Hz |
triphase |
|
Number of cycles |
1,500,000 |
depends on operating conditions |
Operating Conditions
1. Carry out regular maintenance of high-speed doors to provide their smooth and safe operation.
2. Manual closing and opening of the doors is carried out with a hand crank.
3. Don’t strike the door curtain or obstruct its movement.
4. Keep the rails clean.
5. Never stay or cross an opening under a moving door curtain as it may cause serious injury.
6. Keep the door opening clear of any objects during door closing or opening.
Packaging
| Packing in wood |
Packaging features |
| Contents |
wooden crate, door parts are protected with cardboard and fixed with clamps |
| Length, mm |
depends on door parts length |
| Height, mm |
700 |
| Width, mm |
665 |
Additional Information
All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.
Installation
Checking Dimensional Details
- All the necessary measurements are taken inside the premises. Every dimension should be taken at least in three points:
- H — opening height (distance from floor to opening top);
- W – opening width (distance between left and right side of the opening).
- When measuring Н and W the largest figure is taken for final dimension.
Warranty
DoorHan s.r.o. warrants the high-speed doors to operate properly for a period of 1 year from purchase date for retail orders, and for a period of 2 years from purchase date for dealer orders.
Checkout
Managers of the company will answer all
questions by phone:
