HSSD Series High Speed Spiral Doors

High-speed spiral doors combine the best qualities of PVC rolling doors and sectional doors. They are distinguished by high thermal insulation properties, ease of installation and a well-thought-out multi-stage security system. Due to the high speed of operation, they can be used where minimizing waiting time is necessary: in car parks, production and warehouse facilities.

Application:

Car parking, industrial and warehouse complexes

Order with installation

Design

Panel design

Panel colors

Wave

RAL 9006 White aluminium

RAL 5005 Signal blue

RAL 1036 Pearl gold

RAL 9003 Signal white

Equipment

Standard

Optional

Door curtain of 40 mm sandwich panels

Door frame of zinc-coated steel

Electric motor

A set of mounting hardware, instruction manual and product technical data

Transparent window

Transparent panel

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

from 1,600 to 4,500

Opening width, mm

from 1,800 to 5,000

Sideroom clearance, mm

from 350/550 side without drive/side with drive

Headroom, mm

700/860 (depending on the opening)

Gate leaf
Left stand
Right stand
Engine
Control unit

Round spiral

Oval winding of the door curtain

Horizontal lift (door curtain without winding)

Parameter	Value	Notes
Opening speed, m/s	up to 2.5 *	*depending on the type of door leaf and gate size
Closing speed, m/s	0.8
Wind load, Pa	CLASS3	up to 25 m²
Wind load, Pa	CLASS2	over 25 m²
Intensity of use, cycles per hour	up to 150
Thermal resistance, m²·°С/W	0,76
Number of operating cycles	1 500 000

1. Sections of the door leaf must move smoothly along the guides, and the door itself must be balanced, i.e., its weight must be compensated by the torque of the springs.

2. Make sure that people and animals are not in the area of the gate while it is operating.

3. It is strictly prohibited to move under the moving door leaf, as this can lead to injury.

4. Do not subject the gate to impacts or interfere with its free movement when opening and closing.

5. Do not expose the guides and rollers to contamination, as this may impair smooth operation.

6. Make sure that there are no foreign objects or debris in the opening while the blade is moving. Their presence can lead to skewing and jamming of the gate.

Attention! It is prohibited to operate the gate if any malfunctions are detected.

Packing in wood	Packaging features
	Wooden box

Additional Information print

It is recommended to store sandwich panels in their original packaging in a horizontal position on a flat surface for no more than 6 months from the date of production in closed warehouses or under a canopy. The panels must be protected from direct sunlight, precipitation and contamination.

Installation

Mounting Options

Checking Dimensional Details

Overhead mounting

H is the height of the opening (distance from the floor to the top of the opening).
B — opening width (distance from the left edge to the right edge of the opening).
h — lintel (distance from the top of the opening to the obstacle).
b1/ b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B, the largest value is taken as the final size; when measuring h, b1 and b2, the smallest value is taken.
To take the necessary indicators, a tape measure and a building level are enough. All measurements are taken indoors. Each value must be measured at at least three points.

Warranty print

The buyer is provided with a performance guarantee for spiral gates produced by the DoorHan concern for a period of 2 years from the date of purchase.

New Products

A rubber seal connects the panels to each other, closing the thermal circuit.

A low noise level during operation is ensured by a PVC-coated roller and an aluminum guide.