Wind load resistance for gates of the SPEEDROLL series is given for the gate in the closed position. Gates are not used in places with unstable and increased wind loads caused by natural or man-made factors, such as: buildings located on sea coasts or in the mountains; multi-level heated underground parking lots with multiple entrances and exits; production facilities with powerful supply and exhaust ventilation; in buildings of complex configuration with many gate openings, where strong drafts may occur. If one or more of the above factors are present, it is recommended to use a SpeedFold series door or a HSSD series spiral door.
To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.
Manual opening and closing of the gate is done using a crank.
Do not subject the gate to impacts or interfere with its free opening and closing.
Do not allow the PVC sheet guide to get dirty.
It is prohibited to stand in the opening while the gate is opening and closing to avoid injury.
Make sure that there are no foreign objects in the opening when opening and closing the gate.
The self-healing function of the door leaf in the guides is used to operate the gate in emergency conditions, in the event of an unintentional collision with a vehicle; it is not intended to work in the event of deliberate and systematic knocking of the door leaf from the guides. The functionality of the function is ensured by the possibility of the “zipper”, installed on the door leaf from plastic guides, coming out. The functionality of the function cannot be ensured in the event of impacts that exceed the strength parameters of the individual components of the door leaf and system elements, for example, in the case of a collision with the door leaf at high speed, impacts with sharp objects, impacts on the upper part of the gate with raised forks of a forklift, etc.
