Anti-vandal barrier BARRIER PROTECTOR PRO

The product is designed to control entry into courtyard areas of residential areas and industrial facilities, as well as to restrict travel on the streets of gardening communities. The steel anti-vandal housing reliably protects the barrier mechanisms from illegal actions, mechanical damage and environmental influences. The reinforced boom, welded from steel profiles, moves horizontally and has no weak spots. Anti-vandal hardware was used as fastening elements of the structure, the peculiarity of which is that they cannot be dismantled using conventional tools and techniques.

Application:

Entry into the territory of villages, SNT, PZhSK, etc.
Entry to office parking lots, enterprise territories, parking lots with limited access, etc.

Order with installation

Advantages

Широкий диапазон перекрываемых проездов – длина стрелы варьируется от 3 до 6 метров

Светодиодная лампа в новом исполнении является функциональным дополнением и, одновременно, современным декоративным элементом

Магнитные концевые выключатели нового поколения обеспечивают точность срабатывания концевиков в крайних положениях и не подвержены внешним воздействиям климатических условий любого региона страны.

Устойчивая металлическая стрела, которую невозможно прогнуть либо испортить без использования специальных приспособлений

Возможность перевода автоматики на ручной режим управления (в случае отсутствия электроэнергии).Для защиты от несанкционированной разблокировки привод и корпус оснащены замками

Широкий диапазон перекрываемых проездов – длина стрелы варьируется от 3 до 6 метров

Design

Barrier boom, welded from steel pipes and painted in RAL 7004 (gray)

Barrier post covered with 2 mm thick steel panels. Panel colours: RAL 7004 (grey) and RAL 9005 (black)

Equipment

Standard

Optional

Barrier post with built-in LED warning lights.

Steel reinforced barrier boom.

Barrier boom catcher post.

Rack kit.

Wireless photocells PHOTOCELL-W

WI-FI module for wireless control (generation of a NO control signal) of electric drives.

GSM module for receiving a signal from a mobile phone and transmitting a control command to start an electric drive or barrier.

Remote control TRANSMITTER 2-PRO-BLACK for remote control of two automatic devices.

TRANSMITTER 4-PRO-BLACK remote control for remote control of four automatic devices.

TRANSMITTER 4 remote control for remote control of four automatic devices.

TRANSMITTER-PREMIUM remote control in a metal case, designed for remote control of four automatic devices.

Wireless control button COMMAND-433 for remote control of two automatic devices.

Cigarette lighter remote control CAR-TRANSMITTER for remote control of two automatic devices.

KEYPAD code keyboard for remote control of an electric gate drive equipped with a built-in or external DoorHan receiver.

Key-button KEYSWITCH for sending a control command to the control unit of the automatic system by turning the key.

Anti-vandal code keyboard KEYCODE for controlling an automatic device, can also be used as an external keypad or proxy card reader.

Siren SIRENA for sound notification of gate movement.

Heater HEATER for heating the electric drive of the barrier when operating at low temperatures.

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control.

LED signal lamp with LAMP-PRO antenna for warning of gate movement.

The “speed bump” made of wear-resistant artificial rubber ensures easy installation of electrical wiring between poles without gating the road surface.

Technical description

Size Table

Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

3,000, 3,500, 4,000, 4,500, 5,000, 5,500, 6,000

Opening height, mm

1 145

Clearance, mm

745

Boom length, mm

4,300 (3,000), 4,800 (3,500), 5,300 (4,000), 5,800 (4,500), 6,300 (5,000), 6,800 (5,500), 7,300 (6,000)

Boom height, mm

400

Case dimensions (LxWxH), mm

1 104 × 445 × 1 282

Frame
Arrow
Rear barrier panel
Rear barrier panel cover
Front barrier panel
Side barrier panel
Junction box
Wireless photocells PHOTOCELL-PRO
Roller support for beam 71 × 60 × 3.5
Toothed rack DHRACK 12 × 30 (1 m)
Rear cover for beam 71 × 60 × 3.5
End roller assembly for rolling beam 71 × 60 × 3.5
Catching post
Drive plate
Drive
Guide device
Upper barrier panel assembly
Signal lamp BARRIER-PRO

Parameter	Value	Notes
Boom length, m	3; 3,5; 4; 4,5; 5; 5,5; 6
Supply voltage, V	220
Power, W	130
Operating temperature range, °С	-20...+50
Door opening speed, m/min	9
IP protection class	IP54

1. When opening manually, do not use much force. Move the arrow evenly. It is forbidden to move the arrow with sudden jerks.

2. When using an automatic drive, follow the instructions supplied with the drive.

3. Do not move the boom while the drive is engaged.

4. Keep children away from control devices (buttons, remote controls).

5. Make sure that children and animals are not in the range of the barrier while it is operating.

6. It is strictly prohibited to cross the path of the boom during opening and closing, as this may cause serious injury.

7. Do not subject the barrier to impacts or interfere with its free opening and closing.

8. It is prohibited to install additional equipment or accessories, or to independently replace or adjust individual parts, without consulting the manufacturer.

9. Make sure that during work there are no foreign objects in the path of the boom, as this can lead to damage to the barrier.

10. Keep branches and bushes away from the boom shift area to avoid interference when the barrier is operating.

11. In winter, it is necessary to clear the drive, gear and rack of snow and ice.

Packing in bubble wrap	Packaging features
Description	The packaging of the barrier boom consists of bubble wrap wrapped around the boom with an overlap, the bubble film is secured with tape with the company logo
Description	The barrier base packaging consists of bubble wrap wrapped around the barrier base with an overlap, the bubble film is secured with tape with the company logo
Contents	Bubble wrap with company logo, tape with company logo

Additional Information print

After installation, it is necessary to check the movement of the boom. The arrow should move smoothly, without jerking or squeaking. The boom blade must be level (vertically and horizontally) and enter the catcher when closing. The deflection of the supporting beam in the closed position (with support on the lower catcher platform) should not exceed 1/300 of the opening width. In other positions, the amount of deflection is not limited, but the deflection should not interfere with the free movement of the boom and normal operation of the drive, provided that the ground surface exceeds the zero mark by no more than 30 mm. Otherwise, adjust the position of the roller bearings.

It is prohibited to install additional equipment or accessories, or to replace or adjust individual parts yourself, without consulting the manufacturer. It is recommended to use only original spare parts and accessories during installation and further operation. The manufacturer is not responsible for possible injuries or damage caused to people, animals or things in the event of unauthorized modification.

Installation

Mounting Options

The barrier post is installed on a concrete base using anchor bolts. Anchor bolts are included in the delivery of the product.

Warranty print

The buyer is provided with a guarantee of the reliability of the anti-vandal barrier produced by the DoorHan concern for a period of 1 year from the date of purchase.