en
Catalog
Home
Catalog
Contacts
en
Call back Dealer account
+9 71 4 382 90 00
Sectional doors
Doors
Industrial folding, sliding and swing doors
Doors and gates for refrigerated rooms
Roller shutters and roller doors
Rolling doors made of steel profiles
Industrial equipment
Steel entrance doors
Automation
Automation for roller shutters
Hangar doors
Buildings
Hangar doors
Curtain lift gates HD20/40 series with a rotating column
Lifting curtain gates of the HD10, HD20, HD40 series
Loading and unloading equipment
Cantilever type dock leveler with rotary lip, DLHHC series
Cushion sealer DSHC series
DSHINF series inflatable sealer
DSHRD Series Rigid Frame Sealer
DSHRN Series Folding Frame Sealer
External farm series FEH, FET
Folding bridge stationary FTF, sliding bridge FTS
Leveler platform with retractable lip, DS series
Leveling platform with a retractable ramp, console type, DSMC series
Leveling platform with retractable lip DSM series
Leveling platform with rotating lip, DLHH series
Lift table with one pair of scissors, LT series
Lifting table with four pairs of scissors 4LT series
Lifting table with three pairs of scissors 3LT series
Lifting table with two pairs of scissors 2LT series
Light loading vestibule DHOUSL series
Mechanical leveler platform MODL series
Mechanical leveling platform "MINIDOK" MDLM series
Mobile ramp supported on the car body of the RMTS series
Mobile ramp with three-sided loading, 3SRM series
Mobile ramp without support on the car body, RMFS series
MT Series Portable Bridge
Reloading vestibule of the standard DHOUS series
Short mobile ramp, RM series
PVC strip curtains
Film strip curtains FC series
Plastic swing doors SWD series
SSD series film swing doors
High speed rolling doors
High-speed folding gates SPEEDFOLD SDFB
High-speed folding gates SPEEDFOLD SDFS series
High-speed rolling gates of the SPEEDROLL SDA series
High-speed rolling gates of the SPEEDROLL SDC series
High-speed rolling gates of the SPEEDROLL SDF series
High-speed rolling gates of the SPEEDROLL SDI series
High-speed rolling gates of the SPEEDROLL SDO series
High speed spiral doors
HSSD Series High Speed Spiral Doors
Catalog
Industrial sliding gates with bottom guide ISG-LG series

Industrial sliding gates with bottom guide ISG-LG series

Sectional doors
Doors
Industrial folding, sliding and swing doors
Doors and gates for refrigerated rooms
Roller shutters and roller doors
Rolling doors made of steel profiles
Industrial equipment
Steel entrance doors
Automation
Automation for roller shutters
Hangar doors
Buildings
The gates are intended for installation in premises where it is necessary to close large openings (width up to 30,000 mm and height up to 10,000 mm): in warehouse and garage complexes, vehicle depots, hangars for aircraft, etc.
Application:
  • Sliding gates with a bottom guide are an ideal solution for covering the openings of hangars for storing and servicing large equipment, large and small aircraft hangars
Order with installation
Order with installation
Order with installation
Design
Sandwich panel surface
Colours
Smooth
Smooth
RAL 9003 (white, standard)
RAL 9003 (white, standard)
RAL 8014 (brown)
RAL 8014 (brown)
RAL 5005 (blue)
RAL 5005 (blue)
RAL 6005 (green)
RAL 6005 (green)
RAL 3005 (burgundy)
RAL 3005 (burgundy)
RAL 9006 (silver)
RAL 9006 (silver)
RAL 1014 (beige)
RAL 1014 (beige)
RAL 7004 (grey)
RAL 7004 (grey)
RAL 3000 (flame red)
RAL 3000 (flame red)
RAL 7016 (anthracite grey)
RAL 7016 (anthracite grey)
Equipment
Standard
Optional
Door leaf comprised of steel sandwich panels, hinges, rollers, rubber seals.

Door leaf comprised of steel sandwich panels, hinges, rollers, rubber seals.

Steel top track.

Steel top track.

Handle.

Handle.

Latch locks.

Latch locks.

Steel bottom track.

Steel bottom track.

A passdoor providing access to the premises when the sliding door is closed.

A passdoor providing access to the premises when the sliding door is closed.

Plexiglas window in aluminium framing.

Plexiglas window in aluminium framing.

Heating cable for the bottom track.

Heating cable for the bottom track.

Technical description
Size Table
Opening Dimensions
Construction
Standard Construction
Specifications
Operating Conditions
Packaging
Parameters
Value
Opening width, mm
5,000–30,000
Opening height, mm
2,000–10,000
Sideroom clearance, mm
From 145 (depending on the opening pattern)
  1. Drive mounting bracket
  2. Top guide
  3. Upper guide mounting brackets
  4. Upper roller mounting bracket
  5. Loop
  6. Sandwich panel
  7. Handle
  8. Crossbar bolt
  9. Bottom brush seal
  10. Bottom guide

Left opening

Left opening

Right opening

Right opening

Bi-side opening

Bi-side opening

Parameter Value Notes
Air permeability according to European Standards, Pa 50
Water penetration according to European standards, Pa 50
Wind load, Pa (class according to to European Standards) 480
Thermal resistance, m² · °С/W 0.65 If the door panel thickness is 55 mm
Number of cycles 20,000 Minimum number of cycles at which the manufacturer guarantees that no replacement of any part is required
Door leaf weight, kg/m² 25 If the door panel thickness is 55 mm
Combustibility class according to European Standards Г2 (limited combustibility) If the door panel thickness is 55 mm
Ignitability class according to European Standards В2 (limited ignitability) If the door panel thickness is 55 mm

1. Sliding doors with bottom tracks should open smoothly without jolts or jamming.

2. For opening/closing the door in manual operation use only the door handle.

3. Do not apply too much force when opening/closing the door. Prevent any sharp movements of the door.

4. To prevent an accident keep the door opening clear of people and animals while operating the sliding doors.

5. Keep the door opening clear of any objects while operating the door.

6. Keep clean the moving parts of the door to prevent their jamming.

7. Never touch the moving parts (rollers, panels, etc.) when operating the door.

8. Carry out sliding door maintenance at least once a year.

9. Do not obstruct door curtain movement as it may cause serious injury or door damage.

Packing in wood Packaging features
Length, mm Packaging length depends on sandwich panels length
Width, mm Packaging width equals sandwich panels width + 150 mm
Height, mm Depends on number of sandwich panels
Additional Information print

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.

Installation
Mounting Options
Checking Dimensional Details
Installation on the inside of the wall is recommended when the characteristics of the opening allow it. At the same time, the drive mechanism and guides are completely protected.
Installation on the inside of the wall is recommended when the characteristics of the opening allow it. At the same time, the drive mechanism and guides are completely protected.
Installation on the outside of the wall is suitable when conditions inside the building are more severe than outside or when there is a shortage of free space inside the building.
Installation on the outside of the wall is suitable when conditions inside the building are more severe than outside or when there is a shortage of free space inside the building.
  1. All measurements are taken indoors. Each value must be measured at at least three different points to avoid inaccuracies.
  2. H – opening height (distance from the floor to the top of the opening).
  3. B – opening width (distance from the left edge to the right edge of the opening).
  4. h1 – lintel (distance from the top of the opening to the obstacle).
  5. b1/b2 – left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
  6. When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest.
Warranty print

DoorHan warrants the sliding doors without bottom track to operate properly for a period of 1 year from purchase date for retail orders and for a period of 2 years from purchase date for dealer orders.

New Products
The drive mounting bracket allows you to adjust the chain tension.

The drive mounting bracket allows you to adjust the chain tension.

The bottom guide provides additional resistance to wind loads.

The bottom guide provides additional resistance to wind loads.

Design
Sandwich panel surface
Smooth
Smooth
Colours
RAL 9003 (white, standard)
RAL 9003 (white, standard)
RAL 8014 (brown)
RAL 8014 (brown)
RAL 5005 (blue)
RAL 5005 (blue)
RAL 6005 (green)
RAL 6005 (green)
RAL 3005 (burgundy)
RAL 3005 (burgundy)
RAL 9006 (silver)
RAL 9006 (silver)
RAL 1014 (beige)
RAL 1014 (beige)
RAL 7004 (grey)
RAL 7004 (grey)
RAL 3000 (flame red)
RAL 3000 (flame red)
RAL 7016 (anthracite grey)
RAL 7016 (anthracite grey)
Equipment
Standard
Door leaf comprised of steel sandwich panels, hinges, rollers, rubber seals.

Door leaf comprised of steel sandwich panels, hinges, rollers, rubber seals.

Steel top track.

Steel top track.

Handle.

Handle.

Latch locks.

Latch locks.

Steel bottom track.

Steel bottom track.

Optional
A passdoor providing access to the premises when the sliding door is closed.

A passdoor providing access to the premises when the sliding door is closed.

Plexiglas window in aluminium framing.

Plexiglas window in aluminium framing.

Heating cable for the bottom track.

Heating cable for the bottom track.

Technical description
Size Table
Parameters
Value
Opening width, mm
5,000–30,000
Opening height, mm
2,000–10,000
Sideroom clearance, mm
From 145 (depending on the opening pattern)
Construction
  1. Drive mounting bracket
  2. Top guide
  3. Upper guide mounting brackets
  4. Upper roller mounting bracket
  5. Loop
  6. Sandwich panel
  7. Handle
  8. Crossbar bolt
  9. Bottom brush seal
  10. Bottom guide
Standard Construction

Left opening

Left opening

Right opening

Right opening

Bi-side opening

Bi-side opening

Specifications
Parameter Value Notes
Air permeability according to European Standards, Pa 50
Water penetration according to European standards, Pa 50
Wind load, Pa (class according to to European Standards) 480
Thermal resistance, m² · °С/W 0.65 If the door panel thickness is 55 mm
Number of cycles 20,000 Minimum number of cycles at which the manufacturer guarantees that no replacement of any part is required
Door leaf weight, kg/m² 25 If the door panel thickness is 55 mm
Combustibility class according to European Standards Г2 (limited combustibility) If the door panel thickness is 55 mm
Ignitability class according to European Standards В2 (limited ignitability) If the door panel thickness is 55 mm
Operating Conditions

1. Sliding doors with bottom tracks should open smoothly without jolts or jamming.

2. For opening/closing the door in manual operation use only the door handle.

3. Do not apply too much force when opening/closing the door. Prevent any sharp movements of the door.

4. To prevent an accident keep the door opening clear of people and animals while operating the sliding doors.

5. Keep the door opening clear of any objects while operating the door.

6. Keep clean the moving parts of the door to prevent their jamming.

7. Never touch the moving parts (rollers, panels, etc.) when operating the door.

8. Carry out sliding door maintenance at least once a year.

9. Do not obstruct door curtain movement as it may cause serious injury or door damage.

Packaging
Packing in wood Packaging features
Length, mm Packaging length depends on sandwich panels length
Width, mm Packaging width equals sandwich panels width + 150 mm
Height, mm Depends on number of sandwich panels
Additional Information

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.

Installation
Mounting Options
Installation on the inside of the wall is recommended when the characteristics of the opening allow it. At the same time, the drive mechanism and guides are completely protected.
Installation on the inside of the wall is recommended when the characteristics of the opening allow it. At the same time, the drive mechanism and guides are completely protected.
Installation on the outside of the wall is suitable when conditions inside the building are more severe than outside or when there is a shortage of free space inside the building.
Installation on the outside of the wall is suitable when conditions inside the building are more severe than outside or when there is a shortage of free space inside the building.
Checking Dimensional Details
  1. All measurements are taken indoors. Each value must be measured at at least three different points to avoid inaccuracies.
  2. H – opening height (distance from the floor to the top of the opening).
  3. B – opening width (distance from the left edge to the right edge of the opening).
  4. h1 – lintel (distance from the top of the opening to the obstacle).
  5. b1/b2 – left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
  6. When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest.
Warranty

DoorHan warrants the sliding doors without bottom track to operate properly for a period of 1 year from purchase date for retail orders and for a period of 2 years from purchase date for dealer orders.

Checkout
Managers of the company will answer all
questions by phone:
+9 71 4 382 90 00
CALL BACK