Industrial swing door for refrigerated rooms, IDH1-1 series

Medium- and low-temperature swing doors are designed for people to pass and for conduction of manual loading of refrigeration and freezer compartments in warehouses and food industry enterprises. The doors are designed for high intensity use. The energy efficiency of the design is achieved through the use of modern materials for filling the canvas. The tightness is ensured by a frost-resistant EPDM seal. The reliability of the design is confirmed by a number of cyclic tests, as well as many years of operating experience.

Application:

Food production
Coffee shops, bars, restaurants
Food retail enterprises

Order with installation

Advantages

Full maintainability and the ability to replace any damaged element of the door block.

Heating the lower edge of the door leaf eliminates concrete work.

The use of aluminum profiles in frame and leaf structures reduces their weight and increases corrosion resistance.

Hinges with adjustment in three planes allow you to fine-tune the position of the door leaf.

The use of industrial PIR panels with flammability class G1 gives the door high fire-fighting properties.

Full maintainability and the ability to replace any damaged element of the door block.

Heating the lower edge of the door leaf eliminates concrete work.

The use of aluminum profiles in frame and leaf structures reduces their weight and increases corrosion resistance.

Hinges with adjustment in three planes allow you to fine-tune the position of the door leaf.

The use of industrial PIR panels with flammability class G1 gives the door high fire-fighting properties.

Design

Surface of steel sandwich panel

Colors

Smooth

RAL 9003 white (canvas)

RAL 9006 silver (leaf frame and frame)

Equipment

Standard

Optional

Asymmetrical aluminum frame with cable duct for installing PEN.

Door leaf perimeter seal.

A set of lifting loops, adjustable in three planes.

A set of thermal insulation panels in an aluminum frame.

Handle with lock and emergency exit system.

Bottom seal.

Internal aluminum frame to ensure rigidity of the opening.

Heated door leaf.

Frame perimeter heating for low-temperature doors.

Protective bumper.

Thermal fasteners for installation on sandwich panels.

Additional packaging — wooden crate.

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

600–1 400

Opening height, mm

1 800–2 400

Insulation thickness, mm

80 or 120

Headroom, mm

From 65

Sideroom clearance, mm

From 80

Asymmetrical aluminum frame with cable duct for installing polyurethane foam (stand on the hinge side with insert, stand on the handle side, top cross member) disassembled
Door leaf perimeter seal
Set of eccentric hinges, adjustable in three planes
Door leaf in aluminum frame
Handle with lock and emergency exit system
Bottom seal
Plastic cover of the frame cable channel
Corners for assembling the frame

Medium temperature version

Symbol, parameter name	Calculation formula
b, mm Panel thickness	80
Indoor temperature, °C	From +6 to -5
Temperature in front of the door, °C	From +35 to 0
Humidity, %	Up to 100

Low temperature version, 80 mm panel

Symbol, parameter name	Calculation formula
b, mm Panel thickness	80
Indoor temperature, °C	-5 to -18
Temperature in front of the door, °C	From +35 to -18
Humidity, %	Up to 100

Low temperature version, 120 mm panel.

Symbol, parameter name	Calculation formula
b, mm Panel thickness	120
Indoor temperature, °C	From -18 to -27
Temperature in front of the door, °C	From +50 to -35
Humidity, %	Up to 100

Low-temperature version, 120 mm panel, with heated panel

Symbol, parameter name	Calculation formula
b, mm Panel thickness	120
Indoor temperature, °C	From -27 to -35
Temperature in front of the door, °C	From +50 to -35
Humidity, %	Up to 100

Parameter	Value	Notes
Number of cycles	270 000
Hinge type	Eccentric lifting
Loading capacity of a set of hinges, kg	40
Type of locking mechanism (lock)	Key lockable handle with anti-panic system	Provides emergency opening from inside
Corrosion resistance	High corrosion resistance

To ensure reliable and uninterrupted operation of swing doors, it is recommended that they be regularly inspected and maintained.

Manual opening and closing of doors should only be done using the handle.

Do not subject the doors to impacts or prevent them from opening and closing freely.

Make sure that there are no foreign objects in the opening when opening and closing the doors.

It is prohibited to stand in the opening while opening and closing doors to avoid injury.

Packing in bubble wrap	Packaging features
Contents	Foam corners, bubble film, stretch film
Length, mm	Opening height (H) + 50
Width, mm	Opening width (B) + 50
Height, mm	450 (for a canvas with a thickness of 80 mm) and 500 (for a canvas with a thickness of 120 mm)

Packing in wood	Packaging features
Description	Additional option. When ordering, the door is packed in bubble wrap and packed in a wooden container
Width, mm	Opening height (H) + 300
Length, mm	Opening width (B) + 300
Height, mm	700 (for 80 mm thick sheet) and 750 (for 120 mm thick sheet)

Additional Information print

Hinged industrial doors for refrigerated rooms have a high degree of maintainability. If any structural element fails, it can be replaced as soon as possible without replacing the entire product.

Installation

Mounting Options

Checking Dimensional Details

Surface-mounted installation outside the room with hinges located on the left.

Surface-mounted installation outside the room with hinges located on the right.

All measurements are taken indoors. Each value must be measured at least at three different points to avoid inaccuracies.
H is the height of the opening (distance from the floor to the top of the opening).
B — opening width (distance from the left edge to the right edge of the opening).
h1 — lintel (distance from the top of the opening to the obstacle).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest. The discrepancy between the wall levels can be no more than 3 mm, the discrepancy between the diagonals of the opening — no more than 5 mm.

Warranty print

The buyer is provided with a performance guarantee for refrigerated swing doors produced by the DoorHan concern for a period of 1 year for retail orders and 2 years for dealer orders from the date of purchase.

New Products

The heated recessed threshold prevents the door from freezing even at the lowest temperatures.

New types of thermal fasteners allow you to mount doors on a sandwich panel up to 220 mm thick.