High-speed folding gates SPEEDFOLD SDFB

High-speed folding gates of the SPEEDFOLD SDFB series are designed for installation in large internal and external openings in rooms with high wind loads in industrial, warehouse and other facilities.

Order with installation

Design

Surface type

Таблица

Gate frame without painting, galvanized steel

RAL 9010 (white)

RAL 5002 (blue)

RAL 6026 (green)

RAL 9006 (silver)

RAL 1003 (yellow)

RAL 3002 (red)

RAL 2004 (orange)

Equipment

Standard

Galvanized steel shaft

Canvas

Control unit

Photocells

Technical description

Size Table

Construction

Standard Construction

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

5 000–12 000

Opening height, mm

5 000–7 000

Headroom, mm

From 1 100

Sideroom clearance, mm

From 250

Drive
Shaft box
Canvas
Belt
Transparent insert (window/panel)
Vertical guide
Bottom edge of the canvas

1. To ensure reliable and uninterrupted operation of the door, it is recommended to carry out regular technical inspection and maintenance.

2. Operating instructions for the EFFECT LIGHT house kit.

3. Do not allow the PVC sheet guide to get dirty.

4. It is prohibited to stand in the opening while opening and closing the door to avoid injury.

5. Operating instructions for the EFFECT LIGHT house kit.

Packing in wood	Packaging features
Contents	The packaging is a wooden box made of timber, cardboard is laid between the nodes, everything is secured with clamps
Length, mm	Depends on the door components length
Width, mm	640–705
Height, mm	480–730

Additional Information print

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.

Installation

Mounting Options

Checking Dimensional Details

Overhead installation of high-speed door

Each value must be measured at least at three points (in extreme positions and in the center).
H – opening height (distance from the floor to the top of the opening).
B – opening width (distance from the left edge to the right edge of the opening).
h – lintel (distance from the top of the opening to the ceiling).
b1/b2 – left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B, the largest value is taken as the final size; when measuring h, b1 and b2, the smallest value is taken.

Warranty print

The buyer is provided with a performance guarantee for high-speed folding gates produced by the DoorHan for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.