Plastic swing doors SWD series

Swing swing doors made of high molecular weight polyethylene are designed for installation in industrial, warehouse, commercial and other facilities. The design of the gate allows it to return to its original position and automatically close immediately after passing through it. The gates are characterized by quiet operation and ease of operation.

Application:

Designed for installation on internal openings of industrial premises

Order with installation

Design

Surface type

Smooth

Equipment

Standard

Frame. Can be made of aluminum or stainless steel. It is possible to modify the frame design for use with suspended monorail tracks.

Doors

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width for a single leaf door, mm

from 800 to 1,200

Opening width for a double leaf door, mm

from 1,300 to 2,400

Opening height, mm

from 1,800 to 2,800

Frame
Canvas
Loop
Window
Finger pinch protection

Parameter	Value	Notes
Transparency, %	unchanging
Operating temperature range, °С	from 0 to +45
Leaf opening angle, °	90

1. To ensure reliable and uninterrupted operation of doors, it is recommended to regularly inspect them.

2. Do not subject door surfaces to impacts or interfere with their free opening and closing.

3. It is prohibited to stand in the opening while opening and closing doors to avoid injury.

4. Make sure that there are no foreign objects in the opening when closing the swing doors.

Packing in bubble wrap	Packaging features
Length, mm	depends on door length
Width, mm	depends on door width
Height, mm	depends on number of the doors

Additional Information print

The DoorHan concern loads products onto trucks using a hydraulic crane or forklift with a fork lift of at least 2 m. The buyer or installer must provide the same equipment for moving the products. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.

Can be manufactured with plastic bumpers.

Installation

Mounting Options

Checking Dimensional Details

Plastic swing doors are installed inside the opening

H is the height of the opening.
B is the width of the opening.
h — lintel (distance from the top of the opening to the ceiling).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B, the largest value is taken as the final size; when measuring h, b1 and b2, the smallest value is taken.

Warranty print

The buyer is provided with a performance guarantee for film swing gates produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.