SSD series film swing doors

Hinged film PVC gates are designed to isolate and preserve the microclimate of premises at industrial, warehouse, commercial and other facilities. The design of the gate allows it to return to its original position and automatically close immediately after passing through it. The gates are characterized by quiet operation, easy operation and quick cleaning.

Application:

Warehouse complexes

Order with installation

Design

Surface type

Smooth

Equipment

Standard

Optional

1. Sash

2. Frame

1. Vertical edging of the opening

2. Horizontal edging of the opening

3. Bumper post

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Height, m

from 2 to 3

Width, m

from 0.8 to 3

Swing mechanism
Headscarf
PVC sheet, gate leaf
Aluminium profile
Protective pads
Support assembly

Transparent fabric

The upper part of the canvas is transparent, the lower part is opaque

Canvas with transparent panel

One leaf

Symbol, parameter name	Calculation formula
B, mm Opening width	800 / 900 / 1,000 / 1,100 / 1,200 / 1,300 / 1,400 / 1,500
H, mm Opening height	2,000 / 2,100 / 2,200 / 2,300 / 2,400 / 2,500 / 2,600 / 2,700 / 2,800 / 2,900 / 3,000

Two doors

Symbol, parameter name	Calculation formula
B, mm Opening width	from 1,200 to 3,000
H, mm Opening height	from 2,000 to 3,000

Parameter	Value	Notes
Density, g/cm³	1.22/1.18	Standard film/frost-resistant film
Tensile strength, N/mm²	16/11.5	Standard film/frost-resistant film
Elongation, %	340/390	Standard film/frost-resistant film
Thermal conductivity, W/m·°С	0,14
Noise insulation, dB	35
Transparency, %	80
Hardness, HSA	75/63	Standard film/frost-resistant film
Fire resistance limit, min	Extinguishes, does not burn
Operating temperature range, °С	-15 to +50/-25 to +30	Standard film/frost-resistant film

1. To ensure reliable and uninterrupted operation of the gate, it is recommended that they be regularly inspected.

2. Do not subject the gate surfaces to impacts or interfere with their free opening and closing.

3. It is prohibited to stand in the opening while opening and closing the gate to avoid injury.

4. Make sure that there are no foreign objects in the opening when closing the film gate.

Packing in stretch film	Packaging features
Length, mm	Depends on gate length
Width, mm	Depends on gate width
Height, mm	Depends on the number of gates

Additional Information print

The DoorHan concern loads products onto trucks using a hydraulic crane or forklift with a fork lift of at least 2 m. The buyer or installer must provide the same equipment for moving the products. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.

Installation

Mounting Options

Checking Dimensional Details

Installation of swing film gates is carried out inside the opening

H is the height of the opening.
B is the width of the opening.
h — lintel (distance from the top of the opening to the ceiling).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B, the largest value is taken as the final size; when measuring h, b1 and b2, the smallest value is taken.

Warranty print

The buyer is provided with a performance guarantee for film swing gates produced by the DoorHan concern for a period of 1 year for retail orders and for a period of 2 years for dealer orders from the date of purchase.