Technological double-leaf door FD2H series

Used in the food industry and trade. Serves to separate zones with different heat and humidity conditions.

Application:

Food industry enterprises
Coffee shops, bars, restaurants
Food retail enterprises

Order with installation

Advantages

The door with the lock is active. The lock can be installed on both the left and right wing.

The double sealing circuit ensures high sealing of the opening.

The external and internal parts of the aluminum frame allow you to install doors on walls made of sandwich panels without additional load-bearing structures.

The powder-coated aluminum frame can be used in aggressive environments.

The non-threshold design and lower door seal make it possible to level out uneven floors.

The door with the lock is active. The lock can be installed on both the left and right wing.

The double sealing circuit ensures high sealing of the opening.

The external and internal parts of the aluminum frame allow you to install doors on walls made of sandwich panels without additional load-bearing structures.

The powder-coated aluminum frame can be used in aggressive environments.

The non-threshold design and lower door seal make it possible to level out uneven floors.

Design

Sandwich panel surface

Colors

Smooth

RAL 9003, white (canvas)

RAL 9006, silver (leaf edge)

Equipment

Standard

Optional

Aluminum frame.

Door leaf (active and passive leaves).

Set of accessories.

Internal aluminum frame.

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

From 1 000 to 2 400

Opening height, mm

From 1 600 to 2 700

Insulation thickness, mm

Headroom, mm

From 60

Sideroom clearance, mm

From 60

Sandwich panels
Aluminum door trim profile
Aluminum frame
Loops
Decorative covers
Bottom seal
Mortise lock

Active sash left.

Active sash right.

Parameter	Value	Notes
Filling thickness, mm	40

To ensure reliable and uninterrupted operation of the doors, it is recommended that they be regularly inspected and serviced.

Manual opening and closing of doors should only be done with the handle.

Do not damage the doors and do not prevent them from opening and closing freely.

Make sure that there are no foreign objects in the opening while opening and closing the doors.

It is forbidden to be in the opening while opening and closing the doors to avoid injury.

It is necessary to promptly clean the moving elements of the structure from contamination.

Packing in wood	Packaging features
Length, mm	Depends on sash height
Width, mm	Depends on sash width

Additional Information print

Technological double-leaf doors have increased anti-corrosion resistance and can be used in aggressive environments.

Installation

Mounting Options

Checking Dimensional Details

Surface mounting.

Mounting with inner frame.

All measurements are taken indoors. Measurement of each value must be made at least at three different points in order to avoid inaccuracies.
H — the height of the opening (distance from the floor to the top of the opening).
B — opening width (distance from the left edge to the right edge of the opening).
h1 — lintel (distance from the top of the opening to the obstacle).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest. The discrepancy between the wall levels can be no more than 3 mm, the discrepancy between the diagonals of the opening — no more than 5 mm.

New Products

Mounting without inner frame

Mounting with inner frame

The bottom seal provides reliable sealing of the opening

Design

Sandwich panel surface

Smooth

Colors

RAL 9003, white (canvas)

RAL 9006, silver (leaf edge)

Equipment

Standard

Aluminum frame.

Door leaf (active and passive leaves).

Set of accessories.

Optional

Internal aluminum frame.

Technical description

Size Table

Parameters

Value

Opening width, mm

From 1 000 to 2 400

Opening height, mm

From 1 600 to 2 700

Insulation thickness, mm

Headroom, mm

From 60

Sideroom clearance, mm

From 60

Construction

Sandwich panels
Aluminum door trim profile
Aluminum frame
Loops
Decorative covers
Bottom seal
Mortise lock

Standard Construction

Active sash left.

Active sash right.

Specifications

Parameter	Value	Notes
Filling thickness, mm	40

Operating Conditions

To ensure reliable and uninterrupted operation of the doors, it is recommended that they be regularly inspected and serviced.

Manual opening and closing of doors should only be done with the handle.

Do not damage the doors and do not prevent them from opening and closing freely.

Make sure that there are no foreign objects in the opening while opening and closing the doors.

It is forbidden to be in the opening while opening and closing the doors to avoid injury.

It is necessary to promptly clean the moving elements of the structure from contamination.

Packaging

Packing in wood	Packaging features
Length, mm	Depends on sash height
Width, mm	Depends on sash width

Additional Information

Technological double-leaf doors have increased anti-corrosion resistance and can be used in aggressive environments.

Installation

Mounting Options

Surface mounting.

Mounting with inner frame.

Checking Dimensional Details

All measurements are taken indoors. Measurement of each value must be made at least at three different points in order to avoid inaccuracies.
H — the height of the opening (distance from the floor to the top of the opening).
B — opening width (distance from the left edge to the right edge of the opening).
h1 — lintel (distance from the top of the opening to the obstacle).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest. The discrepancy between the wall levels can be no more than 3 mm, the discrepancy between the diagonals of the opening — no more than 5 mm.

Checkout

Managers of the company will answer all
questions by phone:

+9 71 4 382 90 00

CALL BACK