Catalog
Catalog

Fireproof double doors

Fireproof double doors are characterized by high performance, reliability and durability. They are designed to contain the spread of fire and combustion products. A thermoactive tape is installed around the perimeter of the door, which increases in volume as the temperature rises and seals the opening. Non-flammable high-density mineral wool board is used as a filler for the canvas. Scope of application: in trade pavilions, in offices of schools, hospitals, kindergartens, etc.
Application:
  • Entrance indoors
  • Entrance from the street
Advantages
Confirmed by the Certificate, according to which the fire resistance limit of doors is EI60 and EIS60.
The door leaf is made of galvanized steel using seamless technology — without welded joints.
The high-strength 60 mm thick sandwich-type blade and the frame made of galvanized cold-rolled steel have high corrosion resistance.
Hollow-free filling with a high-density non-combustible mineral wool board of 130 kg/m³ ensures the strength and reliability of the door leaf.
Doors can be made solid or glazed, opening to the right or left, smoke-gas-tight, with the ability to install various additional equipment (glazing, closers, anti-vandal lining, anti-panic handle).
Weather-resistant powder coating in gray (RAL 7035) with a shagreen texture. It is possible to paint in any color according to the RAL map upon individual request.
The thermoactive tape is installed around the perimeter of the door and increases in volume as the temperature rises, reliably sealing the opening.
A removable steel threshold creates additional noise and smoke insulation, providing a tight seal at the bottom of the door. In case of special requirements for premises and buildings of a certain functional purpose (for people with limited mobility), it can be dismantled.
The platband for surface-mounted installation simultaneously performs two functions: it covers the installation gap and performs a decorative function.
The basic package includes a universal single-system cylinder lock for fire doors (key-key mechanism), a spring-loaded steel handle with a non-flammable nylon coating.
Confirmed by the Certificate, according to which the fire resistance limit of doors is EI60 and EIS60.
The door leaf is made of galvanized steel using seamless technology — without welded joints.
The high-strength 60 mm thick sandwich-type blade and the frame made of galvanized cold-rolled steel have high corrosion resistance.
Hollow-free filling with a high-density non-combustible mineral wool board of 130 kg/m³ ensures the strength and reliability of the door leaf.
Doors can be made solid or glazed, opening to the right or left, smoke-gas-tight, with the ability to install various additional equipment (glazing, closers, anti-vandal lining, anti-panic handle).
Weather-resistant powder coating in gray (RAL 7035) with a shagreen texture. It is possible to paint in any color according to the RAL map upon individual request.
The thermoactive tape is installed around the perimeter of the door and increases in volume as the temperature rises, reliably sealing the opening.
A removable steel threshold creates additional noise and smoke insulation, providing a tight seal at the bottom of the door. In case of special requirements for premises and buildings of a certain functional purpose (for people with limited mobility), it can be dismantled.
The platband for surface-mounted installation simultaneously performs two functions: it covers the installation gap and performs a decorative function.
The basic package includes a universal single-system cylinder lock for fire doors (key-key mechanism), a spring-loaded steel handle with a non-flammable nylon coating.
Design
Outside canvas design
Design of the canvas from the inside
Fabric color
Shagreen
Shagreen
Shagreen
Shagreen
Standard color — RAL 7035 (gray)
Standard color — RAL 7035 (gray)
In any color according to the RAL card
In any color according to the RAL card
Equipment
Standard
Optional
Spring-loaded steel handle with non-flammable nylon coating.

Spring-loaded steel handle with non-flammable nylon coating.

Single-system cylinder lock for fire doors.

Single-system cylinder lock for fire doors.

Cylinder key-key mechanism.

Cylinder key-key mechanism.

Standard steel window 300 × 400 mm filled with 22 mm thick fire glass. Steel window of non-standard sizes filled with 22 mm fireproof glass.

Standard steel window 300 × 400 mm filled with 22 mm thick fire glass. Steel window of non-standard sizes filled with 22 mm fireproof glass.

Universal fire locks with an anti-panic function are installed on doors to ensure free exit from the premises in case of risk of an emergency.

Universal fire locks with an anti-panic function are installed on doors to ensure free exit from the premises in case of risk of an emergency.

Anti-vandal lining allows you to preserve the appearance from mechanical damage.

Anti-vandal lining allows you to preserve the appearance from mechanical damage.

The closer is designed to automatically close open doors.

The closer is designed to automatically close open doors.

Technical description
Size Table
Opening Dimensions
Construction
Standard Construction
Specifications
Operating Conditions
Packaging
Parameters
Value
Door block size, B x H , mm
1 150 × 2 050
Door block size, B x H , mm
1 250 × 2 050
Door block size, B x H , mm
1 350 × 2 050
Door block size, B x H , mm
1 450 × 2 050
Door block size, B x H , mm
1 550 × 2 050
Door block size, B x H , mm
1 650 × 2 050
Door block size, B x H , mm
1 750 × 2 050
Door block size, B x H , mm
1 850 × 2 050
Door block size, B x H , mm
1 950 × 2 050
Door block size, B x H , mm
2 050 × 2 050
  1. Door frame
  2. Door leaf
  3. Passive leaf
  4. Steel hinges
  5. Filling and insulation
  6. Powder coating
  7. Universal fire lock for cylinder
  8. Spring-loaded steel handle with non-flammable nylon coating
  9. Espagnolette on passive leaf
  10. Thermoactive tape
  11. Removable steel threshold

High-strength composite material without welded joints. Not subject to corrosion. Filled with high density mineral wool board. High levels of heat and sound insulation, moisture and air tightness.

High-strength composite material without welded joints. Not subject to corrosion. Filled with high density mineral wool board. High levels of heat and sound insulation, moisture and air tightness.

A special rebate profile with a latch for fixing the passive sash. Two circuits of wear-resistant seal.

A special rebate profile with a latch for fixing the passive sash. Two circuits of wear-resistant seal.

Mounting plate for attaching the door closer to the door leaf.

Mounting plate for attaching the door closer to the door leaf.

Removable steel threshold.

Removable steel threshold.

Parameter Value Notes
Number of cycles 500 000
Fire resistance limit, min 60
Smoke and gas tightness limit, min 60
Force of manual opening and closing, N 72/150
Noise insulation, dB 33
Strength of fastening of handles to a cloth, H 1 000
Thermal resistance, m² · °С/W 1.1

The door can be used in industrial atmospheres, in areas with temperate and cold climates, in closed heated and ventilated rooms at ambient temperatures from -25 to +40 °C with relative humidity up to 80 %.

If the door is used from the street side, installation should be done in a cold vestibule to prevent possible condensation on the surface and, as a consequence, deformation of finishing materials.

To avoid fading of the door block coating, installation should be carried out using a protective visor to prevent sunlight and precipitation from reaching the surface of the door block.

It is not allowed to close the door leaf with the locks or bolts extended. This can lead to failure of the lock mechanisms and deformation of the bolts.

Foreign objects are not allowed to get into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during repair and construction work.

It is prohibited to install additional equipment or accessories, or to replace or adjust individual parts yourself without consulting the manufacturer.

Care for decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.

If door systems are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.

It is recommended to lubricate the hinge assembly with a thin layer of lubricant every 6 months.

Packing in bubble wrap Packaging features
Contents Bubble film, cardboard corner, stretch film
Description It is a door block wrapped in bubble wrap with a cardboard corner installed to ensure the safety of the door during transportation; The door block is wrapped with stretch film on top
Height, mm 60
Length, mm 2 100
Width, mm 1 200
Packing on pallet Packaging features
Contents Pallet, stretch film, cardboard corner
Description The packaged doors are stacked vertically on a pallet. A cardboard corner is installed in the corners, designed to preserve the doors during transportation. Then wrapped with stretch film
Number of items in the packaging 22/23
Additional Information print

The door can be transported in the manufacturer's packaging both vertically and horizontally by all types of covered transport or in containers.

When transporting and storing doors, measures must be taken to protect them from mechanical damage, violation of original packaging, contamination, and exposure to precipitation.

Installation
Mounting Options
Checking Dimensional Details
The door frame for surface mounting is the most popular. The frame of the box simultaneously performs two functions: it covers the installation gap and performs a decorative function.
The door frame for surface mounting is the most popular. The frame of the box simultaneously performs two functions: it covers the installation gap and performs a decorative function.
  1. H × B — the size of the building opening.
  2. H1 × B1 — door block size.
  3. H2 × B2 — clear size.
  4. In the case of a non-standard door block size, the light opening is calculated using the formula:
  5. B2 × H2 = (B1 - 112) × (H - 90) — when opening the door 180°;
  6. B2 × H2 = (B1 - 200) × (H - 90) — when opening the door 90°.
  7. Preparation of the construction opening:
  8. Dismantle the old door and make sure the opening is ready to install the door. If the opening is not ready (there are fastening rods, anchor bolts, uneven surfaces in the form of sagging from plaster, wooden blocks from fastening an old door, etc.), then they must be removed. Also, the opening may require additional processing — expansion or narrowing using additional tools (grinder, level) or materials (brick, foam block, metal profile, etc.).
  9. The prepared opening should have a rectangular shape. The wall thickness must be at least 150 mm. The walls must be even and smooth, without sagging plaster and cracks. The deviation of working surfaces from the vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm. The difference in diagonals is no more than 5 mm. The opening must be of sufficient strength and not contain voids.
Warranty print

9. We undertake, at our option, to eliminate identified defects, replace defective products with corrected ones, or reimburse the costs of purchasing defective products. We do not cover the costs of dismantling and installing the door, as well as transportation costs, except in cases specifically stipulated in the purchase and sale agreement.

Design
Outside canvas design
Shagreen
Shagreen
Design of the canvas from the inside
Shagreen
Shagreen
Fabric color
Standard color — RAL 7035 (gray)
Standard color — RAL 7035 (gray)
In any color according to the RAL card
In any color according to the RAL card
Equipment
Standard
Spring-loaded steel handle with non-flammable nylon coating.

Spring-loaded steel handle with non-flammable nylon coating.

Single-system cylinder lock for fire doors.

Single-system cylinder lock for fire doors.

Cylinder key-key mechanism.

Cylinder key-key mechanism.

Optional
Standard steel window 300 × 400 mm filled with 22 mm thick fire glass. Steel window of non-standard sizes filled with 22 mm fireproof glass.

Standard steel window 300 × 400 mm filled with 22 mm thick fire glass. Steel window of non-standard sizes filled with 22 mm fireproof glass.

Universal fire locks with an anti-panic function are installed on doors to ensure free exit from the premises in case of risk of an emergency.

Universal fire locks with an anti-panic function are installed on doors to ensure free exit from the premises in case of risk of an emergency.

Anti-vandal lining allows you to preserve the appearance from mechanical damage.

Anti-vandal lining allows you to preserve the appearance from mechanical damage.

The closer is designed to automatically close open doors.

The closer is designed to automatically close open doors.

Technical description
Size Table
Parameters
Value
Door block size, B x H , mm
1 150 × 2 050
Door block size, B x H , mm
1 250 × 2 050
Door block size, B x H , mm
1 350 × 2 050
Door block size, B x H , mm
1 450 × 2 050
Door block size, B x H , mm
1 550 × 2 050
Door block size, B x H , mm
1 650 × 2 050
Door block size, B x H , mm
1 750 × 2 050
Door block size, B x H , mm
1 850 × 2 050
Door block size, B x H , mm
1 950 × 2 050
Door block size, B x H , mm
2 050 × 2 050
Construction
  1. Door frame
  2. Door leaf
  3. Passive leaf
  4. Steel hinges
  5. Filling and insulation
  6. Powder coating
  7. Universal fire lock for cylinder
  8. Spring-loaded steel handle with non-flammable nylon coating
  9. Espagnolette on passive leaf
  10. Thermoactive tape
  11. Removable steel threshold
Standard Construction

High-strength composite material without welded joints. Not subject to corrosion. Filled with high density mineral wool board. High levels of heat and sound insulation, moisture and air tightness.

High-strength composite material without welded joints. Not subject to corrosion. Filled with high density mineral wool board. High levels of heat and sound insulation, moisture and air tightness.

A special rebate profile with a latch for fixing the passive sash. Two circuits of wear-resistant seal.

A special rebate profile with a latch for fixing the passive sash. Two circuits of wear-resistant seal.

Mounting plate for attaching the door closer to the door leaf.

Mounting plate for attaching the door closer to the door leaf.

Removable steel threshold.

Removable steel threshold.

Specifications
Parameter Value Notes
Number of cycles 500 000
Fire resistance limit, min 60
Smoke and gas tightness limit, min 60
Force of manual opening and closing, N 72/150
Noise insulation, dB 33
Strength of fastening of handles to a cloth, H 1 000
Thermal resistance, m² · °С/W 1.1
Operating Conditions

The door can be used in industrial atmospheres, in areas with temperate and cold climates, in closed heated and ventilated rooms at ambient temperatures from -25 to +40 °C with relative humidity up to 80 %.

If the door is used from the street side, installation should be done in a cold vestibule to prevent possible condensation on the surface and, as a consequence, deformation of finishing materials.

To avoid fading of the door block coating, installation should be carried out using a protective visor to prevent sunlight and precipitation from reaching the surface of the door block.

It is not allowed to close the door leaf with the locks or bolts extended. This can lead to failure of the lock mechanisms and deformation of the bolts.

Foreign objects are not allowed to get into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during repair and construction work.

It is prohibited to install additional equipment or accessories, or to replace or adjust individual parts yourself without consulting the manufacturer.

Care for decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.

If door systems are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.

It is recommended to lubricate the hinge assembly with a thin layer of lubricant every 6 months.

Packaging
Packing in bubble wrap Packaging features
Contents Bubble film, cardboard corner, stretch film
Description It is a door block wrapped in bubble wrap with a cardboard corner installed to ensure the safety of the door during transportation; The door block is wrapped with stretch film on top
Height, mm 60
Length, mm 2 100
Width, mm 1 200
Packing on pallet Packaging features
Contents Pallet, stretch film, cardboard corner
Description The packaged doors are stacked vertically on a pallet. A cardboard corner is installed in the corners, designed to preserve the doors during transportation. Then wrapped with stretch film
Number of items in the packaging 22/23
Additional Information

The door can be transported in the manufacturer's packaging both vertically and horizontally by all types of covered transport or in containers.

When transporting and storing doors, measures must be taken to protect them from mechanical damage, violation of original packaging, contamination, and exposure to precipitation.

Installation
Mounting Options
The door frame for surface mounting is the most popular. The frame of the box simultaneously performs two functions: it covers the installation gap and performs a decorative function.
The door frame for surface mounting is the most popular. The frame of the box simultaneously performs two functions: it covers the installation gap and performs a decorative function.
Checking Dimensional Details
  1. H × B — the size of the building opening.
  2. H1 × B1 — door block size.
  3. H2 × B2 — clear size.
  4. In the case of a non-standard door block size, the light opening is calculated using the formula:
  5. B2 × H2 = (B1 - 112) × (H - 90) — when opening the door 180°;
  6. B2 × H2 = (B1 - 200) × (H - 90) — when opening the door 90°.
  7. Preparation of the construction opening:
  8. Dismantle the old door and make sure the opening is ready to install the door. If the opening is not ready (there are fastening rods, anchor bolts, uneven surfaces in the form of sagging from plaster, wooden blocks from fastening an old door, etc.), then they must be removed. Also, the opening may require additional processing — expansion or narrowing using additional tools (grinder, level) or materials (brick, foam block, metal profile, etc.).
  9. The prepared opening should have a rectangular shape. The wall thickness must be at least 150 mm. The walls must be even and smooth, without sagging plaster and cracks. The deviation of working surfaces from the vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm. The difference in diagonals is no more than 5 mm. The opening must be of sufficient strength and not contain voids.
Warranty

9. We undertake, at our option, to eliminate identified defects, replace defective products with corrected ones, or reimburse the costs of purchasing defective products. We do not cover the costs of dismantling and installing the door, as well as transportation costs, except in cases specifically stipulated in the purchase and sale agreement.

Checkout
Managers of the company will answer all
questions by phone: